3 Paslode Framing Nails
The nails are compatible for use with clipped head nailers or with Paslode pneumatic nailer models 5350PM, IM325 and IM325CT for optimized performance. These nails are 2 3/8' in length and are available in a box of 5000 nails. Paslode F350S Powermaster Plus Air-powered Framing Nailer This auction is for a used Paslode F350S Powermaster Plus air-powered framing nailer(2'3.5' in length. 113' to.131' shank diameters) It is in good condition with some cosmetic wear from use but is not damaged in any way and works perfectly.
- Paslode manufactures their nails from top quality steel. They drive straight and true, regardless of the timber density. The Paslode product design ensures ultra high withdrawal resistance.
- 2000 Count 3-1/4-in x.131 Hot Dipped Galvanized Plus Ring Shank 30-Degree Framing Pneumatic Nails.
- The Paslode Impulse Gun Nails Value Pack features 3000 D-head strip nails with 3 fuel cells for added value. Paslode manufactures their nails from top quality steel. They drive straight and true, regardless of the timber density. The Paslode product design ensures ultra high withdrawal resistance.
Paslode Galvanized Nails
| Finish | Other Names | Description | Class |
|---|---|---|---|
| Bright | Bright Steel | Un-plated, bright iron with no corrosion protective coating. | 1 |
| Copper | Copper Flash | Thin copper coating generally used for the protection of bright steel staples. | 1 |
| Electro Galvanised | E/Galv | Electromagnetic Galvanising uses electrolysis to draw zinc and chromate onto the surface of bright steel. The result is a thin galvanised layer with a smooth finish, typically up to 10μm (microns). | 2 |
| Mechanical Galvanised | M/Galv | Nails are coated with zinc by peening powdered forms of the desired coating onto the surface of the nails. | 2 |
| Galvanised | - | Similar to Hot Dipped Galvanising, the zinc coating is applied by immersing a solid continuous wire feed in molten zinc. | 3 |
| Armor Galv | - | A corrosion resistant zinc/iron alloy coating with a uniform thickness of 40μm microns. Armor Galv nails are suitable for exterior applications where a traditional HDG or M/Galv fastener is specified. | |
| Hot Dipped Galvanised | HDG | Nails are dipped into hot melted zinc until a surface layer of minimum 50μm of zinc has been created. The thickness of the zinc layer varies from minimum 50μm to typically around 80μm. | 3 |
| Polymer Coated | Dip Coated | A functional resin or glue coating is applied to the nail shank to reduce the required nailing power and also to increase the withdrawal resistance of the nail.- | - |